Tri-tool 204B Elbow Mandrel User Manual

92-0697 Rev. 970131Model 204B-EM Elbow MandrelsTABLE OF CONTENTSCUSTOMER MESSAGE Inside Front CoverSAFETY PRECAUTIONS 3GENERAL DESCRIPTION 6MAINTENA

10TRI TOOL INC.92-0697 : Rev. 970131PinLengthCorrect pin length isimportant for rigidity.Use only the correctContact Pins specifiedfor each head size.

11Model 204B-EM Elbow Mandrels92-0697 : Rev. 970131TROUBLE SHOOTINGProblem: The Tool Bit ChattersProbable causes:The tool bit is loose or overextended

12TRI TOOL INC.92-0697 : Rev. 970131Problem: There is a loss of air powerProbable causes:The air supply pressure is too low.The air filter is plugged.

13Model 204B-EM Elbow Mandrels92-0697 : Rev. 970131ACCESSORIESThe following accessory is recommended for use with the Model 204B-EM, ElbowMandrels and

14TRI TOOL INC.92-0697 : Rev. 970131ELBOW MANDREL ASSEMBLYILLUSTRATED PARTS BREAKDOWNParts List, Mandrel Assembly, Elbow (P/N 05-0293)Item PartNo. No.

15Model 204B-EM Elbow Mandrels92-0697 : Rev. 970131Parts List, Mandrel Assembly, Elbow (P/N 05-0293), ContinuedItem PartNo. No. Description QtyNOT SHO

16TRI TOOL INC.92-0697 : Rev. 970131SMALL ELBOW MANDREL ASSEMBLY125634Parts List, Mandrel Assy, Elbow, Small (P/N 06-0417)Item PartNo. No. Description

Copyright 2006Proprietary property of TRI TOOL Inc.No reproduction, use, or duplication of the informationshown hereon is permitted without the expres

3Model 204B-EM Elbow Mandrels92-0697 : Rev. 970131SAFETY PRECAUTIONSWARNING:IN GENERALWhen using rotating head cutting equipment, basic safety precaut

4TRI TOOL INC.92-0697 : Rev. 970131TOOL CAREMaintain tools with care. Keep tools in good operating condition. Sharp tool bitsperform better and safe

5Model 204B-EM Elbow Mandrels92-0697 : Rev. 970131Disconnect power supply during setup and maintenance. Use all ‘Stop’ or Shut off’features available

6TRI TOOL INC.92-0697 : Rev. 970131GENERAL DESCRIPTIONIN GENERALElbow Mandrels have been designed to expand the versatility of the Model 204BBEVELMAST

7Model 204B-EM Elbow Mandrels92-0697 : Rev. 970131MAINTENANCEIN GENERALAll components should be cleaned and coated with a light film of oil prior to s

8TRI TOOL INC.92-0697 : Rev. 970131OPERATION"A" diaminimum"B" diamaximum32-03701.00"(25.4 mm)1.28"(32.5 mm).458"(11

9Model 204B-EM Elbow Mandrels92-0697 : Rev. 970131ContactPin P/N Pin Length32-0370 .458" (11.6 mm)32-0371 .600" (15.2 mm)32-0372 .743"